Kategorie: Routre a Switche

KVM přepínač UNITEK H1310A Omlouváme se, průběžně pracujeme na lepším popisu

Přepínač HPE ION 1430 8G SW STOCK

Netgear Nighthawk WiFi 7 Router RS300, 9.3Gbps - RS300

Přepínač Cisco CICBS220-24P-4G-EU

NULL

Teltonika Rutx11 (RUTX11000000) router290

Přepněte TP-Link TL-SG1048

Wi-Fi router s dvoupásmovým připojením, 5 GHz - rychlost 2 880 Mbps, 2,4 GHz - rychlost 688 Mbps, 4 všesměrové antény, 1x 1Gbps WAN port, 3x 1Gbps LAN port, technologie EasyMesh.

Ubiquiti UniFi Switch Pro Max 48; UniFi Switch (USW-Pro-Max-48) je ideální pro malé a střední firmy, které požadují spolehlivý L3 switch s managementem v profesionálním provedení určený pro montáž do racku 1...

Cisco Catalyst switch C1300-24P-4G - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu Cisco Catalyst řady 1300 jsou managovatelné switche Gigabit Ethernet Layer 3 podnikové třídy určené pro malé a střední podniky a pobočky. Tyto jednoduché, flexibilní a bezpečné switche jsou ideální pro nasazení mimo rozvodnou skříň. Řada Catalyst 1300 pracuje na přizpůsobeném softwaru operačního systému Linux s intuitivním grafickým rozhraním, který zjednodušuje nastavení sítě a pokročilými funkcemi, které urychlují digitální transformaci, zatímco všudypřítomné zabezpečení chrání kritické obchodní transakce. Přepínače řady 1300 poskytují ideální kombinaci cenové dostupnosti a možností pro malé a střední podniky a pomáhají vám vytvořit efektivnější a lépe propojenou pracovní sílu. Stránky produktu: C1300-24P-4G Performance Switching capacity and forwarding rate (All switches are wire-speed and nonblocking) Capacity in millions of packets per second (mpps) (64-byte packets) 41.66 Switching capacity in gigabits per second (Gbps) 56.0 Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4093 VLANs simultaneously Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN Auto surveillance VLAN (ASV) Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN translation Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link UDLD monitors physical connections to detect unidirectional links caused by incorrect Detection (UDLD) wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks DHCP relay at Layer 2 Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported) IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols Head-of-Line (HOL) blocking HOL blocking prevention Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3 IPv4 routing Wire-speed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wire-speed routing of IPv6 packets Layer 3 interface Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for CIDR Routing Information Protocol (RIP) v2 Support for RIP v2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL) DHCP server Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Security Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through a web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops STP Root Guard Prevents edge devices not in the network administrator’s control from becoming STP root nodes STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops) DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP servers IP Source Guard (IPSG) When IPSG is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks IP/MAC/port binding (IPMB) The preceding features (DHCP snooping, IPSG, and DAI) work together to pr...

Router s rychlostí až 6,5 Gbps pro hraní, plynulé streamování, videokonference a zábavu.

MikroTik L009UiGS-2HaxD-IN; Kompaktní a výkonný router s redundantním napájením (DC jack & PoE) a Wi-Fi 6 pro náročné uživatele. Router je vybaven 2jádrovým ARM Qualcomm CPU (IPQ-5018) , 512 MB RAM...

Cisco Catalyst switch C1300-48T-4X - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu Cisco Catalyst řady 1300 jsou managovatelné switche Gigabit Ethernet Layer 3 podnikové třídy určené pro malé a střední podniky a pobočky. Tyto jednoduché, flexibilní a bezpečné switche jsou ideální pro nasazení mimo rozvodnou skříň. Řada Catalyst 1300 pracuje na přizpůsobeném softwaru operačního systému Linux s intuitivním grafickým rozhraním, který zjednodušuje nastavení sítě a pokročilými funkcemi, které urychlují digitální transformaci, zatímco všudypřítomné zabezpečení chrání kritické obchodní transakce. Přepínače řady 1300 poskytují ideální kombinaci cenové dostupnosti a možností pro malé a střední podniky a pomáhají vám vytvořit efektivnější a lépe propojenou pracovní sílu. Stránky produktu: C1300-48T-4X Performance Switching capacity and forwarding rate (All switches are wire-speed and nonblocking) Capacity in millions of packets per second (mpps) (64-byte packets) 130.94 Switching capacity in gigabits per second (Gbps) 176.0 Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4093 VLANs simultaneously Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN Auto surveillance VLAN (ASV) Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN translation Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link UDLD monitors physical connections to detect unidirectional links caused by incorrect Detection (UDLD) wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks DHCP relay at Layer 2 Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported) IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols Head-of-Line (HOL) blocking HOL blocking prevention Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3 IPv4 routing Wire-speed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wire-speed routing of IPv6 packets Layer 3 interface Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for CIDR Routing Information Protocol (RIP) v2 Support for RIP v2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL) DHCP server Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Stacking Hardware stacking Up to 8 switches in a stack. Up to 200 ports managed as a single system with hardware failover Stacking is supported on the following models: Family 1: C1300-16P-4X, C1300-24T-4X, C1300-24P-4X, C1300-24FP-4X, C1300-48T-4X, C1300-48P-4X, C1300-48FP-4X, C1300-8MGP-2X, C1300-24MGP-4X, C1300-48MGP-4X Family 2: C1300-12XT-2X, C1300-12XS, C1300-16XTS, C1300-24XS, C1300-24XT, C1300-24XTS PIDs from the same Family can be stacked together. Cross-stacking between Families is not supported. High availability Fast stack failover delivers minimal traffic loss. Support for LAG across multiple units in a stack Plug-and-play stacking configuration/management Active/standby for resilient stack control Auto-numbering Hot swap of units in stack Ring and chain stacking options, auto stacking port speed, flexible stacking port options High-speed stack interconnects Cost-effective high-speed 10 Gigabit Ethernet fiber interfaces Security Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through a web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops STP Root Guard Prevents edge devices not in...

Switch TP-LINK LS1008G - malý, kvalitní a rychlý 8portový přepínač poskytující přenosovou rychlost LAN portů 1000 Mbps. Všech 8 portů podporuje funkci Auto MDI / MDIX a vy se tak nemusíte starat o to, který kabel máte připojit. Design bez ventilátoru.

NULL

WiFi router TP-Link Archer GE550 BE9300, WiFi 7, 1x 5G WAN, 1x 5GLAN, 3x 2,5GLAN, USB, 2,4/5/6GHz, EasyMesh

Huawei S310-48P4S | Přepínač | 48x GE PoE+ 4x SFP AC 380W Omlouváme se, průběžně pracujeme na lepším popisu

MERCUSYS MS116GS, 16-Port 10/100/1000 Mbps Desktop Switch - 16-portový gigabitový stolný/rackmount prepínač, 6× 10/100/1000 Mbps Auto-Negotiation RJ45 port s podporou Auto-MDI/MDIX, Režim izolácie umožňuje oddelenie klientskej prevádzky jedným kliknutím pre vyššiu bezpečnosť a výkon, Monitorujte a riešte problémy súvisiace so slučkami vo vašej sieťovej štruktúre, aby ste zabránili narušeniam spôsobeným slučkami, Odolné kovové puzdro

NULL

Zyxel XMG-105 5 Ports 2,5G + 1 SFP+ MultiGig unmanaged Desktop Switch

Cisco Catalyst switch C1300-8FP-2G - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu Sada pro montáž do racku není součástí balení. Cisco Catalyst řady 1300 jsou managovatelné switche Gigabit Ethernet Layer 3 podnikové třídy určené pro malé a střední podniky a pobočky. Tyto jednoduché, flexibilní a bezpečné switche jsou ideální pro nasazení mimo rozvodnou skříň. Řada Catalyst 1300 pracuje na přizpůsobeném softwaru operačního systému Linux s intuitivním grafickým rozhraním, který zjednodušuje nastavení sítě a pokročilými funkcemi, které urychlují digitální transformaci, zatímco všudypřítomné zabezpečení chrání kritické obchodní transakce. Přepínače řady 1300 poskytují ideální kombinaci cenové dostupnosti a možností pro malé a střední podniky a pomáhají vám vytvořit efektivnější a lépe propojenou pracovní sílu. Stránky produktu: C1300-8FP-2G Performance Switching capacity and forwarding rate (All switches are wire-speed and nonblocking) Capacity in millions of packets per second (mpps) (64-byte packets) 14.88 Switching capacity in gigabits per second (Gbps) 20.0 Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4093 VLANs simultaneously Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN Auto surveillance VLAN (ASV) Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN translation Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link UDLD monitors physical connections to detect unidirectional links caused by incorrect Detection (UDLD) wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks DHCP relay at Layer 2 Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported) IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols Head-of-Line (HOL) blocking HOL blocking prevention Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3 IPv4 routing Wire-speed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wire-speed routing of IPv6 packets Layer 3 interface Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for CIDR Routing Information Protocol (RIP) v2 Support for RIP v2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL) DHCP server Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Security Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through a web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops STP Root Guard Prevents edge devices not in the network administrator’s control from becoming STP root nodes STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops) DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP servers IP Source Guard (IPSG) When IPSG is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks IP/MAC/port binding (IPMB) The preceding featur...

PLANET IGS52254P2S; Průmyslový spravovatelný L2+ PoE přepínač 4x 1000BaseT, 4x SFP 100/1000BaseX (diagnostika SFPDDM), 1x DI/DO, napájecí výkon až 144W. Web/SNMPv3 management, 255 VLAN 802.1Q sítí, Spanning...

Switch, 16 PoE+ portů, 2 gigabitové sloty SFP pro vysokorychlostní připojení, celkový výkon PoE portů 150 W, duální zásobník IPv4/IPv6, platforma Omada SDN, aplikace Omada, barva černá.

Secure Firewall

Ethernetový přepínač s 5 porty RJ45 Shelly LAN Switch Ethernetový přepínač Shelly LAN Switch je navržen tak, aby poskytoval efektivní a stabilní síťové připojení pro různá zařízení. Zařízení s pěti po

NULL

Desktop switch disponující 16x gigabitovými ethernet porty a 2x SFP+ porty pro 10GB optickou konektivitu. Model CSS318-16G-2S+IN je ideální pro sestavy, kde je 24 portů příliš mnoho a 8 portů prostě nestačí. Jeho kompaktní desetipalcový formát a cenová dostupnost z něj činí ideální řešení pro malé a středně velké kanceláře, domácí sítě nebo kde je klíčový prostor a efektivita. Díky univerzálním možnostem montáže lze CSS318-16G-2S+ instalovat do 10palcových racků i standardních 19palcových racků Součástí dodávky i křidélka pro montáž switche do racku. SwOS je přístupný přímo z webového prohlížeče a poskytuje základní i pokročilé funkce: • Broadcast storm control • MAC filtering • VLAN configuration • Traffic mirroring • Bandwidth limitation • Adjustment of MAC and IP header field • Port-to-port forwarding Podrobné technické specifikace: Product code: CSS318-16G-2S+IN Storage: 16 MB Flash Number of 1G Ethernet ports: 16 Number of 10G SFP+ ports: 2 Switch chip model: 98DX2518 Dimensions: 218 x 157 x 44 mm Operating system: SwOS (Min. version 2.17) Operating temperature: -40°C to +70°C Napájení: Number of AC inputs: 1 Max current: 0.197 A AC input range 100-240 V Max power consumption (without attachments): 10 W Max power consumption: 13 W

XGS1935-52HP, 52 Port Lite-L3 Smart Managed PoE Switch, 48x Gigabit PoE and 4x 10G SFP+, hybrid mode, standalone or NebulaFlex Cloud, 375 Watt PoE

Konzole Ubiquiti UISP, brána firewall

Router LT500 4G LTE AC1200 Duálny pás Wi-Fi LTE zrýchľuje až do 150/50 Mbps AC1200 Wi-Fi pre hladkú anténu s vysokým ziskom pre zvýšený rozsah PPTP/L2TP/OpenVPN/WIRESGUARD/IPSEC/Zerotier VPN kompatibilný s viacerými DNS od CloudFlare/Nie290

Cisco CBS350-8FP-E-2G Business 350 Series Switch - REFRESH Součást všech malých podniků Jedná se o produkt z programu REFRESH (-RF). V rámci tohoto programu jsou nabízena opravená zařízení, případně zařízení z kvartálových rotací. REFRESH zařízení disponují stejnými funkcemi, podporou a zárukou, jako zařízení zcela nová. Podnikové switche jsou základní součástí každé sítě. Společnost Cisco nabízí rozsáhlé portfolio síťových přepínačů pro malé firmy, využitelné v každé fázi Vašeho podnikání. Cisco Business 350 Managed Switches jsou neodmyslitelnou součástí pro spolehlivou síť malých firem. Díky intuitivnímu ovládání, pokročilým funkcím a zabezpečení jsou přepínače řady Cisco Business 350 navrženy tak, aby urychlili Vaši digitální transformaci. Výhody Cisco Business 350 Series Intuitivní ovládání k automatizaci nasazení, monitorování a správě životnosti Vašich switchů Rozsáhlé zabezpečení chránící Vaši síť a soukromí Vašich zákazníků Gigabitový Ethernet a 10GE uplink, rychlá přenosová rychlost Možnost spojení až čtyř samostatných switchů, fungující jako jedno zařízení s jednotnou správou a kontrolou Stránky produktu: CBS350-8FP-E-2G Administration guide: Administration guide Administration guide (pdf): Administration guide (pdf) Technické specifikace: Počet portů 10 Provedení Rack-mount Porty 8x GbE, 2 x GbE RJ-45/SFP combo, PoE+ Výkon Switching capacity: 20.0 Gbps Forwarding performance (64-byte packet size): 14.88 Mpps Power over Ethernet (PoE) PoE+ (8 ports, 120W) VLAN Ano Protokol pro vzdálenou správu SNMP, RMON, HTTP, HTTPS, TFTP, Telnet, SSH Standardy IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3z, IEEE 802.3ae IEEE 802.3an, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN IEEE 802.1w Rapid STP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af IEEE 802.3at, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3az Velikost MAC tabulky 16 000 RAM 512 MB Flash 256 MB Napájení 100-240 V (50-60 Hz), externí/td> Rozměry (Š x V x H) 268 x 185 x 44 mm Hmotnost 3.5 kg Provozní teplota -5 až 50°C Provozní vlhost 10 - 90% Skladovací teplota -25 až 70 °C

Cisco switch CBS350-8P-E-2G-UK - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu UK = produkt určený pro trh v Anglii identický produkt k EU modelům s rozdílem napájecího kabelu pro UK, náhradní kabel CAB-TA-EU je součástí objednávky Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci. Záruka platná do End of Support 31. 10. 2029. Oznámení End of Life pro CISCO CBS350 Stránky produktu: CBS350-8P-E-2G-EU Quick start guide: Quick start guide Switching capacity and forwarding rate (All switches are wire speed and nonblocking) Capacity in Millions of Packets per Second (mpps) (64-byte packets) 14,88 Switching Capacity in Gigabits per Second (Gbps) 20 Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4,094 VLANs simultaneously Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication CPE VLAN Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported) IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols. Head-of-Line (HOL) blocking HOL blocking prevention Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3 IPv4 routing Wirespeed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wirespeed routing of IPv6 packets Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for classless interdomain routing RIP v2 Support for Routing Information Protocol version 2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL) DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Security ecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops) DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers. IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing. Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks. IP/MAC/Port Binding (IPMB) The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work to...

Patch kabel Ubiquiti UniFi SFP DAC

Cisco Catalyst switch C1300-24T-4G CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu Cisco Catalyst řady 1300 jsou managovatelné switche Gigabit Ethernet Layer 3 podnikové třídy určené pro malé a střední podniky a pobočky. Tyto jednoduché, flexibilní a bezpečné switche jsou ideální pro nasazení mimo rozvodnou skříň. Řada Catalyst 1300 pracuje na přizpůsobeném softwaru operačního systému Linux s intuitivním grafickým rozhraním, který zjednodušuje nastavení sítě a pokročilými funkcemi, které urychlují digitální transformaci, zatímco všudypřítomné zabezpečení chrání kritické obchodní transakce. Přepínače řady 1300 poskytují ideální kombinaci cenové dostupnosti a možností pro malé a střední podniky a pomáhají vám vytvořit efektivnější a lépe propojenou pracovní sílu. Stránky produktu: C1300-24T-4G Performance Switching capacity and forwarding rate (All switches are wire-speed and nonblocking) Capacity in millions of packets per second (mpps) (64-byte packets) 41.66 Switching capacity in gigabits per second (Gbps) 56.0 Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4093 VLANs simultaneously Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN Auto surveillance VLAN (ASV) Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN translation Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link UDLD monitors physical connections to detect unidirectional links caused by incorrect Detection (UDLD) wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks DHCP relay at Layer 2 Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported) IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols Head-of-Line (HOL) blocking HOL blocking prevention Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3 IPv4 routing Wire-speed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wire-speed routing of IPv6 packets Layer 3 interface Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for CIDR Routing Information Protocol (RIP) v2 Support for RIP v2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL) DHCP server Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Security Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through a web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops STP Root Guard Prevents edge devices not in the network administrator’s control from becoming STP root nodes STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops) DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP servers IP Source Guard (IPSG) When IPSG is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks IP/MAC/port binding (IPMB) The preceding features (DHCP snooping, IPSG, and DAI) work together to prevent Deni...

EAGLE PRO AI N300 Smart Router Mesh Smart Roaming Create Whole-home mesh Wi-Fi with once network name and automatically connect as you move through your home - Optimisation, Keep you on the cleanest channel through continuous scan - Improvement, Collaborating mesh nodes optimise your network traffic - Connectivity, Eagle PRO AI app provides notifications and usage reports - Expandable, EAGLE PRO AI scales to your home layout to ensure best Wi-Fi - EAGLE PRO AI Assistant, proactive app provides notifications and usage reports to keep your  Wi-Fi and network traffic optimal - Enhanced Parental Controls, Create profiles, set schedules, establish bedtime, block specific web domains, and pause the internet - Voice Control, Works with Amazon Alexa and Google Assistant for convenient

Netgear 24-Port Gigabit Ethernet, PoE+, Smart Switch, 4 SFP+ Ports (190W) - GS728TXP

Mercusys Halo H85X (2-pack) je moderný mesh WiFi 6 systém s duálnym pásmom a rýchlosťou až 3000 Mbps (2402 Mbps/5 GHz, 574 Mbps/2,4 GHz). Pokrýva plochu až 460 m2 a podporuje pripojenie až 150 zariadení súčasne. Ponúka plynulý roaming medzi jednotkami, jednoduché ovládanie cez aplikáciu a eliminuje slabý signál v celej, 1x 2.5 Gpbs a 2x Gigabit port

Prepínač D-Link D-Link-10-Port 10/100/1000 Gigabit Poe Smart Switch290

Atte Switch Poe s iPups-17-11-H 17-Port Atte

TP-LINK Deco X50 Pro(3-pack) - Wi-Fi 6 mesh systém pre celú domácnosť AX3000, Mimoriadne rýchla Wi-Fi 6 s rýchlosťou až 3,0 Gb/s, 4 streamy, menšie oneskorenie (2×2/HE160 2402 Mb/s + 2×2 574 Mb/s), 2× 2,5 Gb/s porty plne využívajú gigabitové rýchlosti miestneho poskytovateľa internetu, Bezproblémové sieťové pokrytie Wi-Fi až 600 m2 ( 3-pack), AI-Driven Mesh - Inteligentne sa učí sieťovému prostrediu, aby poskytoval ideálnu Wi-Fi jedinečnú pre váš domov, TP-Link HomeShield - Poskytuje komplexnú ochranu siete, robustnú rodičovskú kontrolu a ochranu internetu vecí v reálnom čase, AKCIA! Po zakúpení produktu a registrácii získate CashBack až 40 EUR. (musíte registrovať aj starý produkt, ktorý nahrádzate) Registrácia produktu.

www.mader.cz

Prepínač Delta GTX-A1-06-42

cAP LTE12 ax garantuje vynikající pokrytí i členitých areálů s velkým počtem klientů. Řešení pro provozovatele pop-up obchodů pod širým nebem, stánky s občerstvením na festivalu nebo parkových kaváren. Zařízení, které odolá náročným podmínkám rušných a frekventovaných prostor - cAP LTE12 ax s rychlým a spolehlivým mobilním internetem. Výkonné pokrytí bezdrátovým standardem Wi-Fi 6 pro lokality mimo instalované vysokorychlostní přípojky díky distribuci GSM signálu. Díky bezdrátovému standardu 802.11ax 6. generace je k dispozici až o 40 % vyšší rychlost v pásmu 5GHz a až o 90 % vyšší rychlost ve spektru 2,4 GHz (v porovnání s předchozími generacemi). Zařízení standardu AX jsou odolnější vůči i těm nejnáročnějším scénářům bezdrátového rušení a nabízí stabilnější a nepřerušovaný signál. cAP a je vybaven moderním čtyřjádrovým procesorem s frekvencí 1,8 GHz, úložištěm NAND a gigabyte pamětí RAM. Kapacitně nic nebrání plnému využití renomovaného síťového softwaru RouterOS v7 jako jsou • pokročilá nastavení pro brány firewall • hardwarové šifrování IPsec • Wireguard, BGP, VPN tunneling apod. Díky Wi-Fi 6 můžete naplno využít potenciál rychlého modemu CAT12 LTE 600 Mb/s. Šifrování OWE/WPA3-PSK/WPA3-EAP a ochrana řídicího rámce pomáhají předcházet nejrůznějším útokům, jako je například brute-forcing a deautentizační útoky. Pokud máte více přístupových bodů na větším území, oceníte vylepšený plynulý rychlý přechod v roamingu. Instalaci usnadní vybavení AP funkcemi PoE-in a PoE-out. Tedy k zařízení cAP ax můžete použít k napájení dalších zařízení. Jelikož je zařízení vybaveno 48V napájením, lze z PoE-out portu zároveň napájet nejen další síťové prvky jako přepínače či další cAP jednotky, ale i kamery CCTV. AP podporuje systém centrální správy wifiwave2 CAPsMAN - nastavením až stovek zařízení na pár kliků. Tip pro pokročilé - funkce tlačítka osazeného uprostřed cAP je konfigurovatelné (může např. spouštět jakýkoli skript RouterOS). Technické specifikace: Product code: cAPGi-5HaxD2HaxD&EG12-EA CPU: Quad-Core auto (864 - 1800 MHz) CPU architecture: ARM 64bit Size of RAM: 1 GB RAM type: DDR3L Storage: 128 MB, NAND Number of 1G Ethernet ports: 2 Switch chip model: IPQ-6010 Wireless interface model: QCN-5022 (2.4 GHz), QCN-5022 (5 GHz) Wireless: 2.4 GHz 802.11b/g/n/ax, 5 GHz 802.11a/n/ac/ax Antenna gain: 2.4 GHz - 6 dBi, 5 GHz - 5.5 dBi LTE category: 12 (600Mbps Downlink, 150Mbps Uplink) LTE modem: EG12-EA SIM slot: 1 (Micro SIM) TAC: 86056104 LTE FDD bands: 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900MHz) / 20 (800 MHz) / 28 (700MHz) LTE TDD bands: 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) 3G Category: R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G Bands: 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) Dimensions: 228 x 48 mm Operating system: RouterOS v7, License level 4 Operating temparature: -40°C to +50°C Napájení: Number of DC inputs: 2 (PoE-In, DC jack) PoE-In input Voltage: 18-57 V DC jack input Voltage: 18-57 V Power adapter nominal voltage: 48 V Power adapter nominal current: 0.95 A PoE-In: 802.3af/at PoE-Out: Passive PoE up to 57V Smart PoE: Controller Max out per port output (input < 30 V): 0.6 A Max out per port output (input > 30 V): 0.4 A Max total out: 0.6 A Total output power: 22.8 W Total output current: 0.6 A Max power consumption (without attachments): 13 W Max power consumption: 33 W

Dahua Technology Přepínač PRŮMYSLOVÝ POE PŘEPÍNAČ S3226-24ET-240 24PORTOVÝ SFP DAHUA Výrobce: Dahua Technology Kategorie: Přepínače

WiFi AX1800, Wi-Fi 6, Dual Band, Mu-Mimo, 3xrj45 1000MB/S, WPA3, 2-pak_000D_ Model: x18 Typ: XDSL Sieťová architektúra: gigabitethernet_x0 bit/S , porty We/ Štandardy: 802.11ax, štandardy, štandardy, štandardy, štandardy, štandardy, štandardy Band: 2,4 GHz, PAS Počet antén: 2 Anténa: Interná Bezpečnosť ovanie/ portov filtrovanie URL Správa, monitorovanie, Konfigurácia: Domov: Domov: Rýchle nastavenie Základné nastavenie Pokročilé nastavenie Logout - Reštartujte jazyk Automatické sieť: Sieťová sieť Topológia Sieť Vymažte predvolenú párovaciu sieť: Nastavenie LAN IP/Mac Nastavenie DDNS nastavenia IPTV Nastavenie IPTV nastavenie IPTV . Typ Static IP, DHCP, PPPOE/Rusko PPPOE, PPTP/Rusko PPTP, L2TP/Rusko L2TP QoS: Riadenie rýchlosti hore/dole na základni Wan WAN na základe IP adresy NAT: Virtual Server (Porter-Direction) DMZ VPN Passthrem Firmware Time Configuration Remote Správa nastavení hesiel Plán reštartujte systém System System Journal Napájanie: 12V DC/1A Čierna farba Rozmery: Jednotka: 10 vozňová teplota: 0 ~ 50 ° C Teplota skladovania: -40 ~ 70 ° C Prvá vlhkosť: 5% ~ 95% bez kondenzácie vlhkosť skladovanie: 5% ~ 95% bez kondenzácie Ďalšie parametre: Rýchlosť prenosu dát Mesh/Reset: 2.4GHz: až 574 Mb/s (2*2 40 MHz) 5GHz : Až 1201 Mb/s (2*2 80MHz) 290

Výrobce: D-Link;

NULL

NETGEAR GS316v3 - Přepínač - nespravovaný - 16 x 10/100/1000 - Stolní počítač, montážní lišta Výrobce: NETGEAR

MikroTik Cloud Core Router, CCR2004-16G-2S+ CCR2004-16G-2S+ je router do 19 racku z nové řady CCR routerů, která přichází s nejvyšším poměrovým výkonem na 1 jádro ze všech CCR, což je nejdůležitější aspekt, pokud jde o náročnější operace založené na processing per-connection (např. QoS). Router je poháněn CPU s 64bit ARM architekturou s taktem 1700 MHz, má 4GB RAM typu DDR4 a 128MB NAND uložiště. Router disponuje 16× Gigabit LAN, 2× SFP+ slot (možnost zapojit 1G i 10G moduly), plnohodnotným USB 3.0 a sériovým portem typu RJ45. Na zadní straně má router dva ventilátory a 2 redundantní zdroje. Klíčové vlastnosti Výkonné rackmount zařízení s ARM 64bit architekturou CPU 1700 MHz, 4 jádra, 4GB RAM, 128MB NAND Redundantní napájení - 2 Hot-Swap zdroje Aktivní chlazení díky 2 ventilátorům Rozhraní: (16) Gigabit, (2) SFP/SFP+, (1) USB 3.0 Předinstalován RouterOS L6 Obsah balení Zařízení Napájecí kabel Uši do racku Technické specifikace Konektory a rozhraní Možnost více WAN Ano Rychlost LAN (16) 10/100/1000Mbps Gigabit LAN Ano Optické rozhraní (2) 1G/10Gbps Sériový port RJ45 USB Ano Napájení Typ napájení Ze sítě (230V) Max. spotřeba energie [W] 48 Napájení přes konektor/svorkovnici 230V AC Fyzické charakteristiky Provedení Rackmount Počet U pozic 1 Ventilátory (2) 40 x 40 mm Tlačítka Reset Provozní teplota [°C] -20 až 60 Šířka [mm] 443 Výška [mm] 44 Hloubka [mm] 210 Hardware CPU AL32400 Frekvence CPU [MHz] 1700 Počet CPU jader 4 Interní uložiště [MB] 128 RAM [MB] 4096 Software Operační systém RouterOS - L6 Podpora IPv6 Ano Výchozí IP adresa 192.168.88.1 Výchozí jméno a heslo admin / - Užitečné odkazy Datasheet Diagnostika vadné jednotky Jak se bránit ESD veškeré informace o produktech společnosti MikroTik aktuální verze RouterOS ke stažení aktuální verze WinBoxu výpočet parametrů bezdrátového spoje

Bezdrátový router Wi-Fi 6 s rychlostí až 3000 Mbps pro domácí i kancelářské sítě. Dual-band technologie s podporou 160MHz pásma, gigabitové porty, MU-MIMO, OFDMA a pokročilé zabezpečení WPA3.

Přepínač CUDY FS106P Síťové standardy: IEEE 802.3uIEEE 802.3atIEEE 802.3afIEEE 802.3iIEEE 802.3x Podporované kabelové typy: Cat6+Cat4Cat8.1Cat7Cat3Cat7eCat5eCat8Cat5Cat6Cat6aCat6e Přenosová rychlost s

Název: MW63VK 4G Mobile WIFI, (Type A) Barva: bílý Qualcomm SDX12-2 + QCA6174A _x 256MB NAND flash + 256MB DDR Anténa: LTE DL 2x2MIMO, WIFI Internal 2X2 MIMO Wifi: 802.11b/g/n/ac, 2.4 GHz Interface : 1 x 4FF SIM slot, 1x Power, 1x Micro USB 2.0 Led: Signal, Battery, WIFI

Na popise produktu pracujeme a doplníme ho v najbližšej možnej dobe Produkt je možné zakúpiť.

NETGEAR GS524v3 - Přepínač - 24 x 10/100/1000 - Lze montovat do rozvaděče, pro připevnění na zeď.

RouterBOARD 5x GLAN, 1x SFP, PoE-out 500 mA/port, SwOS, správa VLAN, desktop/plast, bez ventilátoru.

D-Link DMS 1250-28P

P5 5G SA/NSA AX3000 Wi-Fi 6 CPE 5G SA/NSA CPE (SUP-6) AX3000 Wi-Fi (2,4 GHz a 5GHz) Qualcomm Chip

Zvolte WiFi 7 a připravte své podnikání na budoucnost.

Cisco Catalyst switch C1300-48FP-4X - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu Cisco Catalyst řady 1300 jsou managovatelné switche Gigabit Ethernet Layer 3 podnikové třídy určené pro malé a střední podniky a pobočky. Tyto jednoduché, flexibilní a bezpečné switche jsou ideální pro nasazení mimo rozvodnou skříň. Řada Catalyst 1300 pracuje na přizpůsobeném softwaru operačního systému Linux s intuitivním grafickým rozhraním, který zjednodušuje nastavení sítě a pokročilými funkcemi, které urychlují digitální transformaci, zatímco všudypřítomné zabezpečení chrání kritické obchodní transakce. Přepínače řady 1300 poskytují ideální kombinaci cenové dostupnosti a možností pro malé a střední podniky a pomáhají vám vytvořit efektivnější a lépe propojenou pracovní sílu. Stránky produktu: C1300-48FP-4X Performance Switching capacity and forwarding rate (All switches are wire-speed and nonblocking) Capacity in millions of packets per second (mpps) (64-byte packets) 130.94 Switching capacity in gigabits per second (Gbps) 176.0 Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4093 VLANs simultaneously Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN Auto surveillance VLAN (ASV) Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN translation Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link UDLD monitors physical connections to detect unidirectional links caused by incorrect Detection (UDLD) wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks DHCP relay at Layer 2 Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported) IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols Head-of-Line (HOL) blocking HOL blocking prevention Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3 IPv4 routing Wire-speed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wire-speed routing of IPv6 packets Layer 3 interface Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for CIDR Routing Information Protocol (RIP) v2 Support for RIP v2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL) DHCP server Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Stacking Hardware stacking Up to 8 switches in a stack. Up to 200 ports managed as a single system with hardware failover Stacking is supported on the following models: Family 1: C1300-16P-4X, C1300-24T-4X, C1300-24P-4X, C1300-24FP-4X, C1300-48T-4X, C1300-48P-4X, C1300-48FP-4X, C1300-8MGP-2X, C1300-24MGP-4X, C1300-48MGP-4X Family 2: C1300-12XT-2X, C1300-12XS, C1300-16XTS, C1300-24XS, C1300-24XT, C1300-24XTS PIDs from the same Family can be stacked together. Cross-stacking between Families is not supported. High availability Fast stack failover delivers minimal traffic loss. Support for LAG across multiple units in a stack Plug-and-play stacking configuration/management Active/standby for resilient stack control Auto-numbering Hot swap of units in stack Ring and chain stacking options, auto stacking port speed, flexible stacking port options High-speed stack interconnects Cost-effective high-speed 10 Gigabit Ethernet fiber interfaces Security Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through a web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops STP Root Guard Prevents edge devices not ...

D-Link DMS 1024

R1200 AC1200 DUAL BAND Smart Wi-Fi Router AC1200 dvojpruhový Wi-Fi router antény s vysokým ziskom 5DBI na pokrytie veľkého domu Vstavaná firewall bude chrániť vašu domácu sieť. Zabezpečenie siete pri stlačení tlačidla WPS Model: WR1200 Typ: XDSL Sieťová architektúra: Fasthernet Porty We/D: 4 x 10/100 mbit/s, porty We/ štandard, Standard , štandardy Band: 5 GHz, PAS Počet antén: 4 Anténa: Externé permanent Zisk antény: 5 Bezpečnosť: 64/128 bitov WPA-PSK/WPA2-PSK WPA/WPA2_x00D , Wake on LAN TTL: rozšírenie/spoof/vlastné DNS: CloudFlare/Google/NextDNS/Custom IPv6: Relé, Dynamic (SLAAC/DHCPV6) IP), Passhthrough , Map-E (Dual-Stack), DS-Lite (Dual- Stack) Šírenie spektra: DSSS Modulácia: BPSK, QPSK, CCK a OFDM (BPSK/QPSK/QPSK/16-QAM/64-QAM) VPN Klient: PPTP: PPTP: PPTP: PPTP/L2TP/OpenVPN/Wireguard CWMP Protocol: TR06 / TR098 / TR111 / TR181 ACS Slouží kompatibilitu: Genieacs, Open ACS Napájení: Externí napájení: 12V/1A Podporované operační systémy: Windows 10, podporované operační systémy, podporované operační systémy, podporované operační systémy, podporované operační systémy, podporované operační systémy , podporované operačné systémy, podporované operačné systémy, podporované operačné systémy, podporované operačné systémy, operačné systémy, operačné operačné systémy , podporované operačné systémy, podporované operačné systémy, podporované operačné systémy Požiadavky na hardvér: Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0 alebo iný prehliadač podporujúci jazyk káblového modemu Java alebo DSL Zahrnuté príslušenstvo: Wi-Fi router AC1200 napájací zdroj Ethernet Cable RJ45 Rýchla inštalácia sprievodca biela farba Rozmery: 221 x_0 nej teplota: 0 ° C ~ 40 ° C (32 ° F ~ 104 ° F) Pracujúca vlhkosť: 10% ~ 90% RH (bez kondenzácie) Ďalšie parametre: Flash: 64 MBIT (8 MB) DDR: 512 MBIT (64MB) Tlačidlo WPS, tlačidlo Resetovanie rýchlosti signálu: 867 Mb/s (5GHz), 300 Mb/s (2,4 GHz) 290

RackMount Kit-D226 - 226mm sada pro montáž stolního switche do stojanu, kompatibilná s 226mm stolným switchom TP-Link s montážnymi otvormi do racku a ďalšími produktami, Pokiaľ si nie ste istí modelom switcha, zmerajte veľkosť montážnych úchytov a rozstup otvorov. Pokiaľ zodpovedajú, je možné ich použiť. Vyrobené zo spoľahlivých kovových materiálov, ktoré sú pevné a odolné. Inštalácia je stabilná a nehrozí ľahké uvoľnenie.

Cisco Catalyst switch C1300-8MGP-2X - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu Sada pro montáž do racku není součástí balení. Cisco Catalyst řady 1300 jsou managovatelné switche Gigabit Ethernet Layer 3 podnikové třídy určené pro malé a střední podniky a pobočky. Tyto jednoduché, flexibilní a bezpečné switche jsou ideální pro nasazení mimo rozvodnou skříň. Řada Catalyst 1300 pracuje na přizpůsobeném softwaru operačního systému Linux s intuitivním grafickým rozhraním, který zjednodušuje nastavení sítě a pokročilými funkcemi, které urychlují digitální transformaci, zatímco všudypřítomné zabezpečení chrání kritické obchodní transakce. Přepínače řady 1300 poskytují ideální kombinaci cenové dostupnosti a možností pro malé a střední podniky a pomáhají vám vytvořit efektivnější a lépe propojenou pracovní sílu. Stránky produktu: C1300-8MGP-2X Performance Switching capacity and forwarding rate (All switches are wire-speed and nonblocking) Capacity in millions of packets per second (mpps) (64-byte packets) 41.66 Switching capacity in gigabits per second (Gbps) 56.0 Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4093 VLANs simultaneously Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN Auto surveillance VLAN (ASV) Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN translation Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link UDLD monitors physical connections to detect unidirectional links caused by incorrect Detection (UDLD) wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks DHCP relay at Layer 2 Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported) IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols Head-of-Line (HOL) blocking HOL blocking prevention Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3 IPv4 routing Wire-speed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wire-speed routing of IPv6 packets Layer 3 interface Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for CIDR Routing Information Protocol (RIP) v2 Support for RIP v2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL) DHCP server Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Stacking Hardware stacking Up to 8 switches in a stack. Up to 200 ports managed as a single system with hardware failover Stacking is supported on the following models: Family 1: C1300-16P-4X, C1300-24T-4X, C1300-24P-4X, C1300-24FP-4X, C1300-48T-4X, C1300-48P-4X, C1300-48FP-4X, C1300-8MGP-2X, C1300-24MGP-4X, C1300-48MGP-4X Family 2: C1300-12XT-2X, C1300-12XS, C1300-16XTS, C1300-24XS, C1300-24XT, C1300-24XTS PIDs from the same Family can be stacked together. Cross-stacking between Families is not supported. High availability Fast stack failover delivers minimal traffic loss. Support for LAG across multiple units in a stack Plug-and-play stacking configuration/management Active/standby for resilient stack control Auto-numbering Hot swap of units in stack Ring and chain stacking options, auto stacking port speed, flexible stacking port options High-speed stack interconnects Cost-effective high-speed 10 Gigabit Ethernet fiber interfaces Security Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through a web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology lo...

D-Link AQUILA PRO AI R95

Vstupné striedavé napätie Vstupné striedavé napätie 100 - 240 V Šírka Šírka 280 mm Hĺbka Hĺbka 180 mm Výška Výška 44 mm

Omada 6portový gigabitový Easy Managed switch se 4 porty PoE+ - 6× 10/100/1000Mb/s RJ45 portov (4× PoE+ s podporou štandardu 802.3at/af), Rozpočet PoE napájania 65W, až 30W pre každý PoE port, Centrálna cloudová správa prostredníctvom webu alebo aplikácie Omada, Až 250 m PoE, QoS, automatické obnovenie PoE a izolácia portov pre spoľahlivú sieťovú infraštruktúru pre dohľad, Automatická prevencia slučiek, VLAN a IGMP Snooping, Dizajn bez ventilátorov pre tichú prevádzku, Odolné kovové puzdro a prevedenie na umiestnenie na stôl alebo montáž na stenu Kompletné portfólio produktov OMADA SDN, ktoré môžete kombinovať, nájdete TU

Cisco Catalyst switch C1300-16P-4X - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu Sada pro montáž do racku není součástí balení. Cisco Catalyst řady 1300 jsou managovatelné switche Gigabit Ethernet Layer 3 podnikové třídy určené pro malé a střední podniky a pobočky. Tyto jednoduché, flexibilní a bezpečné switche jsou ideální pro nasazení mimo rozvodnou skříň. Řada Catalyst 1300 pracuje na přizpůsobeném softwaru operačního systému Linux s intuitivním grafickým rozhraním, který zjednodušuje nastavení sítě a pokročilými funkcemi, které urychlují digitální transformaci, zatímco všudypřítomné zabezpečení chrání kritické obchodní transakce. Přepínače řady 1300 poskytují ideální kombinaci cenové dostupnosti a možností pro malé a střední podniky a pomáhají vám vytvořit efektivnější a lépe propojenou pracovní sílu. Stránky produktu: C1300-16P-4X Performance Switching capacity and forwarding rate (All switches are wire-speed and nonblocking) Capacity in millions of packets per second (mpps) (64-byte packets) 83.32 Switching capacity in gigabits per second (Gbps) 112.0 Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4093 VLANs simultaneously Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN Auto surveillance VLAN (ASV) Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN translation Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link UDLD monitors physical connections to detect unidirectional links caused by incorrect Detection (UDLD) wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks DHCP relay at Layer 2 Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported) IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols Head-of-Line (HOL) blocking HOL blocking prevention Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3 IPv4 routing Wire-speed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wire-speed routing of IPv6 packets Layer 3 interface Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for CIDR Routing Information Protocol (RIP) v2 Support for RIP v2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL) DHCP server Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Stacking Hardware stacking Up to 8 switches in a stack. Up to 200 ports managed as a single system with hardware failover Stacking is supported on the following models: Family 1: C1300-16P-4X, C1300-24T-4X, C1300-24P-4X, C1300-24FP-4X, C1300-48T-4X, C1300-48P-4X, C1300-48FP-4X, C1300-8MGP-2X, C1300-24MGP-4X, C1300-48MGP-4X Family 2: C1300-12XT-2X, C1300-12XS, C1300-16XTS, C1300-24XS, C1300-24XT, C1300-24XTS PIDs from the same Family can be stacked together. Cross-stacking between Families is not supported. High availability Fast stack failover delivers minimal traffic loss. Support for LAG across multiple units in a stack Plug-and-play stacking configuration/management Active/standby for resilient stack control Auto-numbering Hot swap of units in stack Ring and chain stacking options, auto stacking port speed, flexible stacking port options High-speed stack interconnects Cost-effective high-speed 10 Gigabit Ethernet fiber interfaces Security Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through a web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loo...

· Intelligent PoE; · 8-pin assignment PoE power supply; · Long distance PoE; · PoE watchdog; · BT 90W; · All-giga ports; · Wide working temperature;

NULL

Cisco Industrial Ethernet 1000 Series

Router, dvoupásmové připojení - 688 Mb/s při 2,4 GHz, 2 882 Mb/s při 5 GHz, Wi-Fi 7, aplikace Tether, zpětná kompatibilita se všemi generacemi Wi-Fi, zabezpečení HomeShield, Beamforming pro vysoký výkon. Instalace na stůl nebo na zeď.

Ubiquiti UniFi Dream Wall; All-in-one UniFi OS konzole spojuje bezpečnostní bránu, vysokorychlostní přístupový bod, síťový videorekordér (NVR) a gigabitový PoE přepínač do jednoho kompaktního zaří...

Dahua PRŮMYSLOVÝ SPÍNAČ PFS3005-5GT-V2 5-PORTOVÝ DAHUA

Ubiquiti UniFi Pro Max 48 PoE

Cisco Catalyst 8200L-1N-4T

Monitor ASUS VT229H (90LM0490-B01170)

Switch Ubiquiti USW Flex Mini 5 ks.

PARAMETRY Frekvenční rozsah 2400 ~ 2483 MHz Polarizace Lineární (vertikální) Dosah 5,0 dBi VSWR 2,0 Impedance 50 Ohm Typ konektoru RP-SMA Samec Provozní teplota –40 °C ~ +85 °C IP hodnocení IP33 V souladu s RoHS Ano

Cisco Catalyst 9300X

Přepněte Ubiquiti Unifiswitch Flex XG (usw-flex-xg-eu)

PLANET MGB-TSX2 síťový transceiver modul Optické vlákno 1000 Mbit/s mini-GBIC 1310 nm Podpora výměny za provozu: Ano Barva: Nikl Plug and Play: Ano Počet přiložených produtků: 1 kusů Konektor pro opti

PLANET GS421024P2S; Spravovatelný PoE přepínač 24 portů 1000BaseT s injektory 802.3at, výkon až 300 W, 2x SFP porty 100/1000BaseX. Web/SNMPv3/telnet správa, VLAN 802.1Q, QoS, statický trunk LACP, IGMPv3, izol...

Cisco Catalyst 8300-1N1S-6T

Switch Zyxel GS1920-24V2 (GS1920-24V2-EU0101F)

Přepněte SPS-4P/1

Cloud Smart Switch CSS326-24G-2S+RM je smart switch s 24 Gbitovými ethernet porty a dvěma SFP porty s montáží do 1U pozice poháněný operačním systémem SwOS.

Upozornění: Cena veškerých CISCO produktů se týká pouze aktuálních skladových zásob!! Pokud máte zájem o zboží, které není aktuálně skladem, prosím, kontaktujte svého obchodníka. Cenovou nabídku Vám rád připraví. Up to 48 ports of full Power over Ethernet Plus (PoE+) capability Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks Flexible downlink options with data or PoE+ Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160 Gbps UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access Advanced network monitoring using Full Flexible NetFlow Cisco Software-Defined Access (SD-Access): Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE) Network assurance and improved resolution time through Cisco DNA Center Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network Cisco IOS XE: A Common Licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries Product Brochure (pdf) Marketing text Specs Marketing text Extend Intent-Based Networking Everywhere Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry’s unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access. Lifetime Specs Management features Switch type What switch device has, managed or unmanaged. Unmanaged Switch layer A network switch is a computer networking device that links networking segments. A switch has different layers, such as layer 2 (a network bridge, operating at the data link layer, interconnecting a small number of devices) and layer 4 (can act as a firewall, amongst other things). L3 Quality of Service (QoS) support Web-based management Using a website/web application to manage something. Traffic classification ARP inspection Configuring Location Settings (CLI) MIB support BRIDGE-MIB, CISCO-BRIDGE-EXT-MIB, CISCO-BULK-FILE-MIB, CISCO-CABLE-DIAG-MIB, CISCO-CALLHOME-MIB, CISCO-CEF-MIB, CISCO-CIRCUIT-INTERFACE-MIB, CISCO-CONFIG-COPY-MIB, CISCO-CONFIG-MAN-MIB, CISCO-DEVICE-LOCATION-MIB, CISCO-DHCP-SNOOPING-MIB, CISCO-EIGRP-MIB, CISCO-EMBEDDED-EVENT-MGR-MIB, CISCO-ENTITY-FRU-CONTROL-MIB, CISCO-ENTITY-SENSOR-MIB, CISCO-ENTITY-VENDORTYPE-OID-MIB, CISCO-ERR-DISABLE-MIB, CISCO-FLASH-MIB, CISCO-FLOW-MONITOR-MIB, CISCO-FTP-CLIENT-MIB, CISCO-HSRP-EXT-MIB, CISCO-HSRP-MIB, CISCO-IETF-BFD-MIB, CISCO-IETF-PPVPN-MPLS-VPN-MIB, CISCO-IETF-PW-MPLS-MIB, CISCO-IF-EXTENSION-MIB, CISCO-IGMP-FILTER-MIB, CISCO-IMAGE-LICENSE-MGMT-MIB, CISCO-IMAGE-MIB, CISCO-IP-CBR-METRICS-MIB, CISCO-IP-STAT-MIB, CISCO-IP-TAP-MIB, CISCO-IP-URPF-MIB, CISCO-IPSEC-FLOW-MONITOR-MIB, CISCO-IPSEC-MIB, CISCO-IPSEC-PROVISIONING-MIB, CISCO-IPSLA-AUTOMEASURE-MIB, CISCO-IPSLA-ECHO-MIB, CISCO-IPSLA-JITTER-MIB, CISCO-L2-CONTROL-MIB, CISCO-L2L3-INTERFACE-CONFIG-MIB, CISCO-LAG-MIB, CISCO-LICENSE-MGMT-MIB, CISCO-LOCAL-AUTH-USER-MIB, CISCO-MAC-NOTIFICATION-MIB, CISCO-MDI-METRICS-MIB, CISCO-MEDIA-METRICS-MIB, CISCO-MEMORY-POOL-MIB, CISCO-MPLS-LSR-EXT-STD-MIB, CISCO-NBAR-PROTOCOL-DISCOVERY-MIB, CISCO-NHRP-EXT-MIB, CISCO-NTP-MIB, CISCO-PAGP-MIB, CISCO-PORT-SECURITY-MIB, CISCO-PORT-STORM-CONTROL-MIB, CISCO-POWER-ETHERNET-EXT-MIB, CISCO-PRIVATE-VLAN-MIB, CISCO-PROCESS-MIB, CISCO-PRODUCTS-MIB, CISCO-RF-MIB, CISCO-RTP-METRICS-MIB ,CISCO-RTTMON-ICMP-MIB, CISCO-STACKWISE-MIB, CISCO-STP-EXTENSIONS-MIB, CISCO-SYSLOG-MIB, CISCO-TCP-MIB, CISCO-UDLDP-MIB, CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB, ENTITY-MIB, HC-ALARM-MIB, HC-RMON-MIB, IEEE8023-LAG-MIB, IF-MIB, IP-FORWARD-MIB, IP-MIB, LLDP-EXT-MED-MIB, LLDP-MIB, MAU-MIB, MPLS-L3VPN-STD-MIB, MPLS-LSR-STD-MIB, MPLS-VPN-MIB, OLD-CISCO-CHASSIS-MIB, OLD-CISCO-CPU-MIB, OLD-CISCO-INTERFACES-MIB, OLD-CISCO-IP-MIB, OLD-CISCO-MEMORY-MIB, OLD-CISCO-SYS-MIB, OLD-CISCO-TCP-MIB, OLD-CISCO-TS-MIB, POWER-ETHERNET-MIB, RFC1213-MIB, RMON-MIB, RMON2-MIB, SMON-MIB, SNMPv2-MIB, SONET-MIB, TCP-MIB, UDP-MIB Ports & interfaces Basic switching RJ-45 Ethernet ports quantity The number of basic switching RJ-45 Ethernet ports (sockets). 24 Basic switching RJ-45 Ethernet ports type The type/category of basic switching RJ-45 Ethernet ports (sockets). Gigabit Ethernet (10/100/1000) Fast Ethernet (copper) ports quantity 20 Gigabit Ethernet (copper) ports quantity 4 Power connector AC-in jack Networking Networking standards The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g. IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3at,IEEE 802.3bz,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z 10G support The product can use Oracle 10G, which is a database management system introduced in 2003. Copper ethernet cabling technology 10BASE-T,10GBASE-T,100BASE-TX,1000BASE-T Full duplex A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously. IP routing Routing entries 3000 Flow control support Spanning tree protocol VLAN support A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level. Number of VLANs 1024 Data transmission Switching capacity The data transfer capacity of the switch per second. 56 Gbit/s Forwarding rate 41.66 Mpps MAC address table The MAC address is the Media Access Control Address . It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format. 16000 entries Jumbo frames support Jumbo frames 9198 Packet forwarding rate (1 Gbps) 41.66 pps Packet buffer memory 4.1 MB Security Access Control List (ACL) Security algorithms Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product. 128-bit AES Multicast features Multicast support Multicast MAC address table 1000 entries IPv4 multicast entries 3000 IPv6 multicast en

Mikrotik RB4011IGS+5HACQ2HND ROUTER

Improvizace. Přizpůsobování. Překonání obtíží. “Způsob myšlení může být velmi užitečný, ale někdy

Description Industrial 8-Port Gigabit PoE Switch DIN rail, extended temp. range Robust and durable industrial solutions with integrated Power over Ethernet (PoE) function Industrial 8-Port Gigabit PoE Switch 8 x 10/100/1000Base-TX Ethernet PoE por

Hama Textile Design; Podložka pod myš s povrchem z melírované tkaniny se zesíleným okrajem, který zabezpečuje hladký pohyb myši. Spodní strana je vyrobena z protiskluzového materiálu. ZÁKLADNÍ SPEC...

Switch HP Aruba Instant na 1960 12xgt (JL805A)

ZTE MF289F zariadenie pre mibilnú sieť Router Typ zdroja: DC Výstupné napätie: 12 V Farba: Biela LED indikátory: SieťovýVýkonWi-Fi Typ zariadenia: Router Vhodné pre použitie vo vnútri: Áno Šírka: 132 mm Výška: 19

Cisco Catalyst C1000-24T-4X-L Switch Upozornění: Cena veškerých CISCO produktů se týká pouze aktuálních skladových zásob!! Pokud máte zájem o zboží, které není aktuálně skladem, prosím, kontaktujte svého obchodníka. Cenovou nabídku Vám rád připraví. Technické specifikace: Provedení Rack-mountable Porty 24 x 10/100/1000 + 4 x SFP+ Console: RJ-45, USB mini-B, USB A Výkon Switching capacity: 128 Gbps Forwarding performance (64-byte packet size): 41.67 Mpps Power over Ethernet (PoE) Ne Počet VLAN ID 4096 Maximum aktivních VLAN 256 Standardy IEEE 802.1D STP IEEE 802.1p CoS Prioritization IEEE 802.1Q VLAN IEEE 802.1s IEEE 802.1w IEEE 802.1X IEEE 802.1ab LLDP Bluetooth v4.0,IEEE 802.3ad, IEEE 802.3af and IEEE 802.3at, IEEE 802.3ah (100BASE-X single/multimode fiber only), IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X, RMON I and II standards, SNMP v1, v2c, and v3, IEEE 802.3az, IEEE 802.3ae 10 Gigabit Ethernet, IEEE 802.1ax Velikost MAC tabulky 16 000 CPU ARM v7 800MHz RAM 512 MB Flash 256 MB Napájení 100-240 V (50-60 Hz) Rozměry (Š x H x V) 44.5 cm x 24 cm x 4.39 cm Hmotnost 2.78 kg Provozní teplota -5 až 50°C Provozní vlhost 5 - 90% Skladovací teplota -25 až 70 °C Stránky produktu: <a title= Cisco Catalyst C1000-24T-4X-L href= https://www.cisco.com/c/en/us/support/switches/catalyst-1000-24t-4x-l-switch/model.html target= _blank >https://www.cisco.com/c/en/us/support/switches/catalyst-1000-24t-4x-l-switch/model.html

Description Industrial 8-Port Fast Ethernet Switch DIN rail, extended temp. range Robust and durable industrial solutions with standard and DIN Rail mounting Industrial 8-Port Fast Ethernet Switch 8 x 10/100Base-TX Ethernet Ports DIN rail mountab

NULL

NULL

Spravovaný prepínač Ubiquiti UniFi USW Flex Mini 5P (10/100/1000) PoE Sieťové štandardy: IEEE 802.3afIEEE 802.3at Napájací zdroj v cene: Áno Maximálna spotreba energie: 2,5 W Nabíjacie napätie: 5 V LED i